Lilongwe, Mzuzu and Blantyre Rotary kiln type

Load Capacity 500 – 1000kg 

Burn rate – 200kg/hr CAPACITY

Fuel – Diesel  MAIN SOURCE

LPG GAS IGNITER

ELECTRICITY: to run motors,fans,& controllers 

THE System should be energy efficient 

Average Fuel Consumption 5 -10 (liters/hr) 

Auto ignition 

Automatic control and temperature Monitoring

Primary Chamber&POST COMBITION CHAMBERS: Minimum temperature should be 800 degrees celcius

Secondary and Primary Chambers 

POST COMBUSTION CHAMBER Residence time – two(2) seconds

Oxygen content of the emmited gasses shall not be less than 11%

Chimney:

The maximum exit velocity of the emissions shall not be less 10 meters per second

The stack should be insulated to maintain maximum outlet temperature

Sampling platform and port for measurement of emmissions shall be provided*MINIMUM of 18 METERS above ground provided with COMBSTION GAS  ANALYSER  measuring probe for capturing the GAS SAMPLE at the chimney & capable of measuring CO, NOx &SO2

External Dimensions 

Length – 2.5 – 3.0m, Width – 

1.0 – 1.2m, Height – 3.0 – 4.0m

Door Opening (mm) from 750×750- 1000 x 1670 

Casing 5mm mild steel plate fully insulated 

Minimum Temperatures 1300 – 1500 oC 

Maximum Temperatures 1300-1500 oC 

Control Panel 

Dense/heavy duty Refractory concrete lining for maximum heat retention rated to 1500 – 1700 oC 

Solid Hearth Support 

Ashing Door –USER FRENDLY ASH COLLECTING SYSTEM

Loading Door 

Fire Gate